Forum home Problem solving
This Forum will close on Wednesday 27 March, 2024. Please refer to the announcement on the Discussions page for further detail.

Recommendations for Water Butt that connects to guttering

2

Posts

  • JennyJJennyJ Posts: 10,576
    I have a similar arrangement of three, but mine are connected near the top, and they have a tap each so I can fill more than one can at the same time.
    Doncaster, South Yorkshire. Soil type: sandy, well-drained
  • Interesting Jenny.  With that set up, your right hand butt would get filled last then?  I wonder though if the others have more pressure, so fill up quicker?  All that water pushing down, could well mean more pressure, possibly?  I had been wondering if I placed the butts a distance away from our main garden area, if there'd be enough pressure to be able to water plants with a long pipe?    
  • Pete.8Pete.8 Posts: 11,340
    Nice one.  What's that grey pipe for?
    That's my hose.
    All the butts are empty.. :(

    Billericay - Essex

    Knowledge is knowing that a tomato is a fruit.
    Wisdom is not putting it in a fruit salad.
  • JennyJJennyJ Posts: 10,576
    @paulpuk2000, the one nearest the downpipe fills first, but the speed of filling up depends on how hard it's raining onto the roof that drains into that downpipe.
    Pressure at the tap  I think depends only on the height of water in that butt. The levels don't equalise as I use the water, once it's below the level of the connecting pipes.
    Doncaster, South Yorkshire. Soil type: sandy, well-drained
  • steephillsteephill Posts: 2,841
    Connecting near the top is the right idea. The butts will fill in turn, you can use each one without affecting the water level in the others and a leaky tap will only empty one butt.
  • JennyJJennyJ Posts: 10,576
    Good point about the possibility of leaking.
    Doncaster, South Yorkshire. Soil type: sandy, well-drained
  • paulpuk2000paulpuk2000 Posts: 93
    edited August 2020
    Leaking tap is something to consider, for sure.  But as far as pressure is concerned, if you have joined the butts at the bottom, whenever you open the tap, in effect, you have all 3 butts pushing down water, to that tap, so if pressure was a consideration for you, connecting at the bottom may be well worth considering. 

    Thanks to everyone who contributed here.  I really feel like I've joined a family.   :-)

  • steephillsteephill Posts: 2,841
    Makes no difference to pressure, that is governed by the head of water I.e. height of water surface over tap height. You could connect a thousand butts together and the pressure will be just the same as one.
  • Pete.8Pete.8 Posts: 11,340
    I have mine connected at the bottom so the 3 butts act as 1 big butt :) but it makes no difference to the pressure.
    As steephill says you can only increase the pressure by raising the butt


    Billericay - Essex

    Knowledge is knowing that a tomato is a fruit.
    Wisdom is not putting it in a fruit salad.
  • Thanks guys.  I thought I might be stepping on stony ground. 

    So, 3 butts, linked as one (linked at the bottom) means you only use one tap.  This could be useful for me, as I have a narrow gap between the garage and the wendy house, which could probably fit 3 butts in, and would be nearer to the main garden, and not be unsightly, so looks like the bottom linkage, might be the one for me.  (I might need to revise my physics.   :-)   )  
Sign In or Register to comment.