This Forum will close on Wednesday 27 March, 2024. Please refer to the announcement on the Discussions page for further detail.
Hozelock 4 tap connector leaking:(
Hello,
Our Hozelock 4 tap connector has been leaking for a while now and is costing us a lot in water from the leaking!
Its leaking in the red circled areas in the picture below. We have tried putting new hose connectors on and even tried PTFE Thread Seal Tape but it still leaks:( We need the tap on all the time so the watering system works.

This is a brand new hose connector and it's already leaking from under the yellow casing after less than a month.

These pieces are leaking from the gray piece which I believe is actually attached to the 4 way tap connector.



Can anyone suggest a fix or an alternative system to the Hozelock system if it's gonna be an expensive fix? We seem to keep paying out for this system!!
Many thanks,
Court
Our Hozelock 4 tap connector has been leaking for a while now and is costing us a lot in water from the leaking!
Its leaking in the red circled areas in the picture below. We have tried putting new hose connectors on and even tried PTFE Thread Seal Tape but it still leaks:( We need the tap on all the time so the watering system works.

This is a brand new hose connector and it's already leaking from under the yellow casing after less than a month.

These pieces are leaking from the gray piece which I believe is actually attached to the 4 way tap connector.



Can anyone suggest a fix or an alternative system to the Hozelock system if it's gonna be an expensive fix? We seem to keep paying out for this system!!
Many thanks,
Court
0
Posts
i use Gardena connectors which are slightly rubberised and so there is a bit of flex, I find them easy to tighten and waterproof. Hozelock timers are usually very good though, so I wouldn’t jettison your system just yet!
'You must have some bread with it me duck!'
Thanks, I could try lengthing the hose. On further inspection the leak is being caused by the hose connector being pushed out slightly so the conncection is weaker from the tap line to 4 tap connector. Feel like a screw on connection would be better here as that hose is never undone. Would this strain definitely be causing the connections from the 4 tap connector to leak?
I'd also say that the heavier, and more unwieldy, a hose is, definitely makes a difference, as does the water pressure.
I have a piece for joining two bits of hose ,that I got out of Asda and it doesn't leak at all. It was dirt cheap too
I live in west central Scotland - not where that photo is...